SPECIFICATIONS OPTIONS & ACCESSORIES & HOW TO ORDER MEGA 960 OPTIONS SEALS SURGE SUPPRESSION FLUID CONNECTION Performance measurements taken with ambient temperature DI water Use the code numbers for ordering the following options on your Mega 960 pump 960 Use to specify Mega 960 pump P12 3/4˝ NPT adapter nuts P16 1˝ NPT adapter nuts F12 3/4˝ flare tube adapter F16 1˝ flare tube adapter PFA TUBE B12 3/4˝ PFA welded pipe connector PTFE ADAPTER NUT ADAPTER SEAL Options in blue are available at additional cost: 00 Without surge suppressor 85 With Model 85 Surge Suppressor no moving parts pump mounted PFA FLARE INSERT PTFE PUMP BODY 95 With Model 95 Surge Suppressorpneumatically operated pump mounted 0 Standard FKM (Viton ⓒ ) airside seals 1 FFKM (Chemraz ® or Kalrez ® ) airside seals AO No option added A1 Fiber optic cycle probe for pump monitoring and preventive maintenance scheduling Requires monitoring device A2 Quick change base Example of an order number based on configuration options: 960 P16 85 1 AO English Metric Maximum pressure 80 psi 56 Kg/cm 2 Maximum flow rate 25 gpm 95 lpm Suction lift: Dry water column 10 ft 3 m Wet water column 18 ft 55 m Maximum chemical operating temperature 212˚ F 212˚ C Weight 37 lbs 168 Kg FLOW CAPACITY DIMENSIONS DISCHARGE PRESSURE FLOW CAPACITY Viton ® Kalrez ® and Nitrile ® are trademarks of DuPont Chemraz ® is a trademark of Greene Tweed corporation Printed in USA10/2001 FRONT SIDE Trebor International a unit of IDEX Corporation 8100 South 1300 West West Jordan Utah 84088 USA Telephone: 8015618303 USA Toll Free: 8887637867 FAX: 8012552312 Email: treborsales@idexcorpcom Internet: wwwtreborintlcom

SS95 Pulsation Dampener Improve Filter Performance and Reduce Vibration The SS95 uses pneumatic operation to greatly reduce liquid line surging and pulsation associated with reciprocating chemical pumps Compatible with TREBOR’s Maxim Series Magnum 620 and Mega 960 pumps or with any other brand pumps by using the inline option The SS95 handles chemical temperatures up to 180 °C and is constructed with no metal parts or elastomer Orings Fluid contacts only ultrapure PTFE material thereby protecting your process chemicals Performance Operating temperatures up to 180°C Operating pressure up to 80 psig (55 MPa) below 100 °C and up to 45 psig (31 MPa) above 100 °C Reduces liquid line pulsation to ± 3 psig in most applications Construction No metal parts or elastomer Orings for maximum chemical compatibility and corrosion resistance 100% PTFE fluid path Pump mount or inline tee option Cleanroom assembled tested and packaged Field serviceable design 2year no maintenance warranty Product Overview ® SS95 shown mounted on Maxim 50 pump